00079614.DOCX, Version 1.7
20/28
1 PRESET A LEDs
2 CHANNEL faders 1-24
These faders adjust the output of channel 1 to 24 from 0 to 100% or 0 to 255.
3 FLASH buttons 1-24
Press to activate maximum channel output.
4 PRESET B LEDs
5 SCENES LEDs
6 CHANNEL faders 25-48
These faders will adjust the output of channel 25 to 48 from 0 to 100% or 0 to 255.
7 FLASH buttons 25-48
Press to activate maximum channel output.
8 MASTER A fader
This fader will adjust the output of preset A.
9 BLIND button
Press the BLIND and the corresponding FLASH button to take out the channel of the Chaser. In Chase
Scene mode, the output of each channel will be controlled only by the fader or flash button.
10 MASTER B fader
This fader will adjust the output of preset B.
11 HOME button
After pressing the BLIND and the corresponding FLASH button a channel is taken out of the Chaser.
Press the HOME button and the corresponding FLASH button to reinsert the channel into Chaser.
12 FADE TIME fader
Move to adjust fade time.
13 TAP SYNC button
In Auto Chase mode, press the button twice to define chasing speed.
14 SPEED fader
Move to adjust chasing speed.
15 FULL ON button
When activated , all channel outputs will be set to maximum and blackout mode is disabled.
16 AUDIO LEVEL fader
Move to adjust the sensitivity of the audio level.
17 BLACK OUT button
This button will force all DMX values to "0".
18 STEP button
Press once to advance the program to the next step.
19 AUDIO button
Press to activate sound control.
20 HOLD button
Press and hold this button to keep the output.
21 PARK button
In Chase Scene mode, press this button to select SINGLE CHASE or MIX CHASE. In DOUBLE
PRESET, pressing PARK B is same as MASTER B at the maximum. In SINGLE PRESET, pressing
PARK A is same as MASTER A at the maximum.
22 RECORD button
Press to record the step of a program.
23 REC EXIT button
Press to exit recording mode. When the LED ADD KILL lights, Kill mode is active. Press any of the
FLASH buttons and all outputs except for these channels are set to zero.
