www.eurolite.de
39
7
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents! There are no serviceable parts inside the device except for the fuse. Disconnect from
mains before starting maintenance operation! Maintenance and service operations are only to be carried out
by authorized dealers. Should you need any spare parts, please use genuine parts. If the power supply cable
of this curtain becomes damaged, it has to be replaced by authorized dealers only in order to avoid hazards.
Should you have further questions, please contact your dealer.
Replacing the Fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
..............................................................................................................................................................................
8
8
8
8
TECHNICAL SPECIFICATIONS
CRT-200PRO MK2 LED Curtain
Power supply:
100-240 V AC, 50/60 Hz
via included PSU
Power consumption:
30 W
Resolution (WxH):
17 x 11 pixels
Pixel pitch:
180 mm
LED type:
TCL, 5 mm
Dimensions (WxH):
3 x 2 m
Weight:
3.2 kg
Accessory:
Show Stand I Alu, item no.: 59007010
CRT-200PRO MK2 Controller
Power supply:
100-240 V AC, 50/60 Hz
Power consumption:
3 W
Signal connection:
2 x RJ-45
Curtain outputs:
4
Serial connection:
yes
DMX channels:
12
DMX512 connections:
3-pin XLR
Dimensions (LxWxH):
280 x 158 x 46 mm
Weight:
1.3 kg
Specifications are subject to change without notice due to product improvements
