00128658, Version 1.0
32/40
Interconnecting several devices (master/slave operation)
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller. The devices must be set to the corresponding
operating modes.
1 Configure all slave units before connecting the master unit: Press the
MENU
button so many times until
SLAVE
is indicated on the display. Confirm with the
ENTER
button.
2 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
3 Set the master unit to the desired operating mode. The interconnected devices will now operate in sync.
Master/slave operation via QuickDMX
1
Set the master device and each slave device to the same transmission channel using the function
SET
2.4G
. Thus, the spotlights are paired.
2
Set the master unit to the desired operating mode and all slave units to
SLAVE
mode. The devices will
now operate in sync.
Energy-saving mode
The
ECO
mode offers the possibility to adjust the battery life.
1 Press the
MENU
button so many times until
ECO
is indicated in the display. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to choose energy saving mode
ON
or
OFF
, or select super energy
saving mode
S-ECO
. Confirm with the
ENTER
button. In
S-ECO
mode the battery life is 26 hours with
one color and 6 hours with full light output.
QuickDMX transmission channel
You can use the
SET 2.4G
menu to set the wireless transmission channel for QuickDMX operation. Please
refer to the corresponding chapters for further explanation.