EuroLite 51916252, Руководство пользователя

Страница: 21 / 24

00113162.DOCX, Version 1.1 21/24
DMX operation
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 2 control channels.
However, it can also be switched to a mode with 1 or 2 channels if different functions are required. To be
able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller’s documentation.
1 Press the MODE button so many times until CHANNEL is indicated in the display. Confirm with the
ENTER button.
2 The display indicates 1 CH (1 DMX channel) or 2 CH (2 DMX channels). Use the buttons UP and DOWN
to select the desired number of DMX channels. Confirm with the ENTER button.
3 Now the display indicates the menu item for the DMX start address ADDR . Use the buttons UP and
DOWN to set the address. Confirm with the ENTER button.
4 The display will not blink when DMX signals are being received. If no control signals are available, the
display will blink.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Functions in DMX mode
1-channel mode
Channel Value Function
1
Dimmer
000 – 255 Brightness 0–100 %
2-channel mode
Channel Value Function
1
Dimmer
000 – 255 Brightness 0–100 %
2
Strobe
000 – 002
No function
003 – 255 Strobe with increasing speed