EuroLite 41700510, Руководство пользователя

Страница: 28 / 36

00129552, Version 1.0 28/36
Stand-alone mode
Preset colors
In the
C--
mode the device will constantly emit one of 20 preset colors.
1 Press the MENU button so many times until C-- is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired color. Confirm with the ENTER button.
Automatic mode
In automatic mode, 3 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (Au01 – 03) . Confirm with
the ENTER button.
2 Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP01 (slow) to
SP09 (fast). Confirm with the ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (So01~So03) . Confirm with
the ENTER button.
2 Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP01 (slow) to
SP09 (fast). Confirm with the ENTER button.
3 Press the MENU button so many times until SEnS is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to Adjust the microphone sensitivity to the volume of the music
(
SE01
= low,
SE09
= high).
4 If you enable the silent scene mode ( on setting) in menu item SILE , the LEDs will switch off if the volume
is too low or if there is no sufficient bass beat. If you disable this mode ( off setting) the LEDs remain on
during periods without music.
Color mix
In the color mode
Colo
each of the 4in1 LEDs can be individually adjusted in intensity. The device will
constantly emit the set color.
1 Press the
MENU
so many times until
Colo
is indicated in the display. Confirm with the
ENTER
button.
2 Now the display indicates the letter R for the color red and the corresponding brightness value. Use the
buttons UP and DOWN to adjust the desired brightness.
3 Confirm with the ENTER button. Now the color green can be set; then blue and UV until the desired
color intensity is achieved.
Color temperature
In the tEMP mode the device will constantly emit white light. The color temperature of the light beam is
adjustable.
1 Press the MENU button so many times until tEMP is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons
UP
and
DOWN
to adjust the desired color temperature. Confirm with the
ENTER
button.
Total brightness
Menu item dIMM allows adjusting the total brightness for all stand-alone operating modes: C--, Auto, Soun,
Colo and tEMP.
1 Press the MENU button so many times until dIMM is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired brightness ( dl01 = dark, dl09 = bright). Confirm
with the ENTER button.