euroline LED Techno Strobe DMX Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 22

euroline LED Techno Strobe DMX Скачать руководство пользователя страница 20

00064378.DOC, Version 1.0

20/22

Flash-rate setting

Press the MODE button until the display shows

F-0

. Select the desired flash-rate (1 - 9) via the UP or DOWN

buttons.

Brightness setting

Press the MODE button until the display shows

C-0

. Select the desired brightness (0 - 9) via the UP or

DOWN buttons.

Sound Control/microphone sensitivity setting

You can do without a controller as the device features a built-in microphone, which provides automatic sound
control. Strobe effects are sound-controlled.

Press the MODE button until the display shows

S-0

. Select the desired sensitivity (0 - 9) via the UP or

DOWN buttons.

Slave setting

Set the DMX start address 001 on every slave-device. Press the MODE button until the display shows

Add

.

Select the address

001

via the UP or DOWN buttons.

DMX Mode

You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the device will respond to the controller.

Addressing

Press the MODE button until the display shows

Add

. You can now set the desired address (001 - 512) via

the UP or DOWN buttons.

Controlling:

After having addressed the LED Techno Strobe DMX, you may now start operating it via your lighting
controller.

Please, be sure that you don’t have any overlapping channels in order to control each fixture correctly and
independently from any other fixture on the DMX-chain. If several fixtures are addressed similarly, they will
work synchronically.

Note:

It’s necessary to insert the XLR termination plug with 120

in the last lighting in the link in order to ensure

proper transmission on the DMX data link.

DMX-Protocol

Channel

DMX Value Characteristic

1

0-255

Flash-rate

2

0-255

Brightness

Analog controller

The device must be in DMX-mode in order to control it via an analog controller. Press the MODE button until
the display shows

Add

.

«
...
18
19
20
21
22
»

Содержание LED Techno Strobe DMX























Отзывы:

Нет отзывов