© EUROHEAT DISTRIBUTORS (H.B.S) LTD. October 2012
Instructions Part Number IN1263 Ed.A
27
Removing Top Chamber Baffle
Periodically the stove should be thoroughly cleared of all combustion deposits which will necessitate the removal
of the vermiculite baffle and cast protection plates. (Note take care vermiculite baffle is fragile)
The top mica baffle is located in the top of the fire box where it sits on
the L shaped baffle support lugs which are part of the casting of the
left and right side protection plates. For easier access remove the front
fuel guard. To remove (1) slide the baffle board towards the rear of the
fire box (2) whilst lifting the rear of the board upwards. Once the front
of the board has passed the end of the L shaped support lug (3) the
front can then be dropped down and the baffle pulled down into the
main body of the fire box. It can then be angled to withdraw it through
the door.
To refit the replacement reverse the procedure.
Removal of the Upper Protection Plate.
The upper protection plate is held in place by the two side protection
plates. To remove (1) lift up the plate and then (2) draw it towards the
front of the fire box.
As it is drawn forward (3) pull the front edge downwards so moving it
free of the side protection plates. It can then be angled within the fire
box to withdraw it through the door.
To refit the replacement reverse the procedure.
Removal of the Side Protection Plate.
To remove (1) lift up the plate so it is higher than the lugs on the lower
side protection plates and then (2) draw it towards the centre of the
fire box.
As it is drawn towards the centre (3) twist the rear edge towards
the front of the fire box. It can then be angled within the fire box to
withdraw it through the door.
To refit the replacement reverse the procedure.
1
2
3
1
2
3
1
2
3
