© EUROHEAT DISTRIBUTORS (H.B.S) LTD. October 2012
Instructions Part Number IN1263 Ed.A
20
ACME
Getting Started with Coal
(solid mineral fuel)
Having learned where to find the controls, you are now ready to light
a coal fire in the stove, without filling the stove or neighbourhood
with smoke. To light the fire with wood you will need two pieces of
newspaper, a small bundle of kindling wood, and smokeless coal.
Remember that your stove needs your help to gently push start it in the
right direction until it warms. Do not expect it to be on auto pilot until it
reaches its operating temperature.
Ensure the ash pan is fitted and empty,
then securely close the ash pit door.
If the fire is to be lit using paper and wood, set the Plexus
control to maximum air volume and the air direction
lever to mid position, supplying air above and below
the grate. To enable the Air Volume Control knob to be
rotated to the lighting position press the rotation stop
button inwards then rotate the Air Volume Knob.
Lightly crumple two tabloid sized pieces of newspaper and lay
them in the middle of the grate.
Resist the temptation to use more paper than this, or to crumple
it too tightly; doing either will prevent the rapid development
of flames and will cause smoke to be produced.
WOOD
COAL
1
6
5
4
3
2
