manualshive.com logo in svg

Euroheat Edition D N1087, Руководство по трубе

Поделиться
Скачать
Euroheat Edition D N1087 Скачать руководство пользователя страница 2

©

 

EUROHEAT

 

DISTRIBUTORS (H.B.S) LTD. March 2006

Technical Guide IN1087 Edition  C

2

Cannot

be

assumed to work

The installer is responsible under the health and safety at work act 1974 vi the caustic nature 

of fire cement and the possibility of disturbing asbestos and other materials such as ceramic in 

existing installations and to suggest appropriate protection to be given to the person (s) carrying 

out the installation. The complete installation must be carried out with due reference to the British 

Standards,  Codes of Practice and Building Regulations relevant to the fuel type being installed, 

and the manufacturers installation instructions.

This document is a General Installation Guide only. It does not replace the installation instructions 

or building regulations. No installation should be undertaken unless the installer is suitably 

qualified.

Flue Size comparison / volume increase

4” or 100 mm to 5” or 125 mm is an increase of 62.4 %
4” or 100 mm to 6” or 150 mm is an increase of 134 %
5” or 125 mm to 6” or 150 mm is an increase of 44 %
5” or 125 mm to 7” or 175 mm is an increase of 228 %
6” or 150 mm to 7” or 175 mm is an increase of 38.5 %

Pipe Diameter / Cross sectional area
4” or 100 mm = 11.7 sq. ” or 7854 sq. mm
5” or 125 mm = 19.0 sq. “ or 12271 sq. mm
6” or 150 mm = 27.4 sq. “ or 17671 sq. mm
7” or 175 mm = 38.5 sq. ” or 24825 sq. mm

Euroheat

 have provided this document for general help and assistance 

with your flue requirements. The documents aim is to assist with the correct 

installation with our product range of Wood, Multifuel, Oil and Gas Stoves. 

However much of the enclosed information can be of assistance with other 

professionally designed stoves. 

It is more than a coincidence that 

flue 

is ananagram of fuel; both need to be correct.

Use full documents and those referred to in this document
Building Regulations
Approved document J April 2002
Approved Document J: 2002 Edition:
Guidance and Supplementary Information on the UK
Implementation of European
Standards for Chimneys and Flues October 2004.
Approved Document L1A 6th April 2006
Approved Document L1B 6th April 2006
Approved Document L2A 6th April 2006
Approved Document L2B 6th April 2006
Approved Document F Means of Ventilation 2006

Содержание Edition D N1087





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды