7
BUMPER BOAT
FUNCTIONING
The Automatic Games of the “
BUMPER BOAT
” series have been designed to be used in
public, suitably
fi
tted places like amusement parks, fun-fairs and public gardens.
CAUTION
- The internal electric components of the “
BUMPER BOAT
” series are suitably protected
against humidity.
- The components of the “
BUMPER BOAT
” series and the supplied battery-charger in
contact with electric current are well insulated and mechanically protected. The internal
cabling voltage is 24V d.c. and, as for all appliances with electric components, it is
essential to comply with the instructions of this manual and to adopt the usual precautions
for preventing electric shocks when using the game..
ATTENTION
Check the condition of the Automatic Games of the “
BUMPER BOAT
” series and the
supplied battery-charger at least every 15 days and after any long period of inactivity.
Preliminary operations
To make the transport and installation easier, the Automatic Games of the “
BUMPER BOAT
”
series are delivered with
fl
at rubber ring.
Before using the game, carefully follow the steps below in the given sequence:
1
- Unpack the “
BUMPER BOAT
” paying attention not to scratch the
fi
berglass body, then
position it on a clean and level ground to prevent any damage to the in
fl
atable ring.
2
- Insert the pump tube into the in
fl
ation valve
A
after having removed the protection cap
and start in
fl
ating the ring
without completing the operation
(
fi
g. 1).
3
- Place the
fi
berglass reinforced body right in the middle of the in
fl
atable ring, then in
fl
ate
latter completely at about 0.2 atm.
4
- Remove the pump and re
fi
t the protection cap.
Fig. 1
A
