19
BUMPER BOAT
- The battery charger enters the error mode:
-
when the battery is dead;
-
when the poles have been wrongly connected;
-
when the battery voltage is other than the one required;
-
when the battery is damaged;
-
in case of overheating of the battery charger
In such cases, refer to the instructions in the battery charger manual.
- After the recharge, and if you have not to recharge any other Automatic Game, disconnect
the battery charger from the vehicle and from the mains and store it suitably.
ATTENTION
- The battery should not be dip in water or placed closed to wet parts.
- Disconnect the power cord before displacing the battery charger.
- Ensure the power cord of the battery charger is steadily protected and not damaged.
- Plug the battery charger only after having checked the mains voltage is that given in the
plate located on the battery charger external casing.
- Do not connect the battery charger to industrial mains. This connection could alter
the
compliance with the uniform standards on electromagnetic compatibility; as a
consequence it could result in electromagnetic troubles, and cause similar troubles which
could jeopardize the functioning of other appliances. Before plugging, ensure the power
socket is protected by a thermal switch, with an amperage corresponding to that given
on the plate located on the battery charger, and by a differential switch with suitable
cutoff power and sensitivity. Do not connect more battery chargers downstream the same
thermal switch. The installation and use condition of the battery charger must be checked
at least every 15 days and after any long inactivity period.
- Periodically check the condition of the cable and of the power plug, and the ef
fi
ciency of
the differential protection of the battery charger (every 15 days).
- The battery charger should not be tampered or modi
fi
ed by the user. The
EuroGames
products meet the established standards. Repais works should be carried out only by
specialized and authorized technicians. Any repair work carried out by non quali
fi
ed
or authorized people could result in accidents or damages to the users. Before any
intervention, ensure the switch upstream the plug connecting the battery charger to the
power supply line is switched off.
- Do not lay loads on the power cord. Keep off the power cord.
- Do not cover the battery charger when functioning; do not close the ventilation grids of
the plate casing.
