Eurofins Technologies RapidScan ST5-W quick quide | rev. 02
Page 5 | 6
Export results
-
Connect a USB drive in the USB port on the left side of the reader.
-
From the main menu of the reader, enter the “Database” section. Choose the desired analysis data by tapping on the blue box
next to “Date”.
-
Select “Export”.
-
A folder named “data” is created in the USB drive. Both .pdf and .csv files of the day readings are available.
Fig.10
Settings
The “Setting” screen can be accessed by tapping the corresponding button in the Main menu
(fig.11).
-
Date / Time: Date and time can be modified. Tap on the desired box (any of the numbers)
and then select the desired value (use the green arrows to move).
-
Sleep Settings: It is possible to set the sleeping time of the reader (i.e. how many minutes of
inactivity may pass before the screen will turn off). Once the reader is sleeping, it is possible
to activate it again by tapping on the screen. Please note that the higher the sleeping time,
the lower the battery life.
-
Update FW: This allows the software to be updated. Further information will be provided if
necessary.
-
Export debug: The “debug” data contain information on the last test performed with the
reader. Use this function if it is necessary to contact the local technical assistance because
of problems or errors when reading a test. Please export the data prior to analysing a new
test, as only the information related to the last test performed is saved. A USB drive
connected to the reader is necessary to export the data.
-
Advanced: In this section, it is possible to select the reader’s “Reader Check” function.
“Network” section is not available at the moment.
Fig.11
Shut down the reader
-
Press the power button on the right of the “Eurofins Technologies” logo.
-
The screen shown in the figure 12 will be displayed.
-
Select “Power Off”.
Fig.12
