EUROCOM LP-297PB, Руководство пользователя

Страница: 84 / 130

BIOS Utilities
5 - 6 The Setup Program
5
The Setup Program
The Setup program tells the system how to configure itself and manage basic
features and subsystems (e.g. port configuration).
Entering Setup
To enter Setup , turn on the computer and press F2 during the POST . The
prompt ( “Press F2 to Enter Setup” ) seen in
Figure 5 - 1
is usually present
for a few seconds after you turn on the system. If you get a “Keyboard Error”
(usually because you pressed
F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combina-
tion and then hold down F2 when prompted. Setup’s main menu will appear.
Setup Screens
The following pages contain additional advice on portions of the Setup .
Along the top of the screen is a menu bar with menu headings. When you se-
lect a heading, a new screen appears. Scroll through the features listed on each
screen to make changes to
Setup .
Setup Screens
Instructions on how to
navigate each screen
are in the box at the
bottom of the screen.
For help, press
F1 to
call up a General Help
screen, and use the ar-
row keys to scroll up or
down the page.
The “
Item Specific
Help ” on the right side
of each screen ex-
plains the highlighted
item and its options. If
you see an arrow (
X
)
next to an item, press
Enter to go to a sub-
menu on that subject.
The sub-menu screen
which appears has a
similar layout but the
Enter key may execute
a command.