EUROCOM LP-297PB Скачать руководство пользователя страница 52

Страница: 52 / 130

Advanced Controls

3 - 2 Advanced Video Controls

Advanced Video Controls

This section is about making adjustments for the LCD, and switching display
devices.

Make sure you have installed the video driver or all the options listed on the
following pages will not be available to you (see

“Installation Procedure” on

page 4 - 4

Dynamic Video Memory Technology

Intel

DVMT automatically and dynamically allocates as much (up to 64MB)

system memory (RAM) as needed to the video system. DVMT returns what-
ever memory is no longer needed to the operating system which ensures opti-
mal graphics and system memory performance.

DVMT Notes

DVMT is not user-con-
figurable.

DVMT is not local vid-
eo memory.

DVMT will not function
in MS-DOS. DOS uses
the legacy memory in-
dicated.

Note

: The video driv-

ers for Windows 2000
require Service Pack 1
or later to run correctly.
Check with the

Mi-

crosoft Windows 2000

support site for the lat-
est updates.

Содержание LP-297PB



































































































































Результаты поиска

Содержание LP-297PB

Отзывы:

Бренды по названию

Популярные бренды

EUROCOM LP-297PB, Руководство пользователя

Результаты поиска

Содержание LP-297PB

Отзывы:

Бренды по названию

Популярные бренды