53
• Repeat this process in the same way to set the month and day.
• Press the
SET
button once you have completed each setting. The air pressure unit will start to flash. Press the
WIND +
or
PRESSURE -
buttons to change the unit. Confirm your selection with the
SET
button. The air pressure
calibration setting will start to flash. If you do not need to calibrate the air pressure, press the
SET
button to
confirm the current setting. For more information on calibrating the air pressure, see "m) Calibration" in part 12
("Functions"). The light intensity unit will start to flash.
• Press the
WIND +
or
PRESSURE -
buttons to change the unit. You can choose from Klux, Kfc and W/M
2
(hectopascals). Confirm your selection with the
SET
button. The temperature unit will start to flash.
• Press the
WIND +
or
PRESSURE -
buttons to change the unit. You can choose from °Celsius or °Fahrenheit.
Confirm your selection with the
SET
button. The wind speed unit will start to flash.
• Press the
WIND +
or
PRESSURE -
buttons to change the unit. You can choose from km/h (kilometres per hour),
mph (miles per hour), knots, m/s (metres per second) and bft (Beaufort). Confirm your selection with the
SET
button. The precipitation unit will start to flash.
• Press the
WIND +
or
PRESSURE -
buttons to change the unit. You can choose from IN/HR (inches per hour) and
MM/HR (millimetres per hour). Confirm your selection with the
SET
button. The hemisphere setting will start to flash.
• Press the
WIND +
or
PRESSURE -
buttons to change the setting. Select "NHT" if you are located in the northern
hemisphere, or "STH" if you are located in the southern hemisphere. Confirm the setting using the
SET
button. The
weather station will revert to the home screen.
b) Setting the alarm time and weather alarm
The weather station features an alarm that goes off at a preset time. It also has a visual and acoustic alarm that
is triggered when weather measurements exceed or drop below a preset value. Press any button (except the
LIGHT/SNOOZE
button) to silence the alarm.
• To set the alarm, press and hold the
ALARM
button (3) for 2 seconds. The hour value for the alarm time will start
to flash and "ALM" will be displayed.
• Press the
WIND +
(5) or
PRESSURE -
buttons (4) to change the hour value. Confirm your selection with the
SET
button (8). The minute value will start to flash.
• Press the
WIND +
(5) or
PRESSURE -
buttons (4) to change the minute value. Confirm your selection with the
SET
button.
To enable the alarm, press the
ALARM
button while the hour or minute value is still flashing.
The bell symbol (
) will be displayed. To disable the alarm, press the
ALARM
button again.
The bell symbol (
) will disappear from the display.
•
The maximum indoor temperature for the weather alarm will start to flash and "HI" will be displayed. Press the
WIND +
(5) or
PRESSURE -
buttons (4) to change the setting. Confirm your selection with the
SET
button (8).
The minimum indoor temperature for the weather alarm will start to flash and "LO" will be displayed. Press the
WIND +
(5) or
PRESSURE -
buttons (4) to change the setting. The next weather alarm setting will be displayed.
Follow the steps above to configure the other alarm settings in the following order: Indoor humidity, max. value = "HI",
minimum value = "LO" > outdoor temperature, max. value = "HI", minimum value = "LO" > outdoor humidity, max.
value = "HI", minimum value = "LO".
•
Confirm the last setting using the
SET
button. The home screen will be displayed.
• To enable/disable the weather alarm for a particular measurement (e.g. indoor humidity), press the
ALARM
button
when the desired measurement is displayed. The alarm symbol will be displayed next to the measurement when
the alarm is enabled. It consists of the
symbol together with the trigger value.
