- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may damage
the product.
• Never use the product immediately after it has been brought from a cold room into a warm one. The
condensation generated could destroy the product. Allow the product to reach room temperature
before connecting it and putting it to use. This may take several hours.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Power adapter
• The mains outlet must be located near to the device and be easily accessible.
• Only use the supplied mains adapter as a power supply.
• Only connect the power adapter to a normal mains socket connected to the public supply. Before
plugging in the power adapter, check whether the voltage stated on the power adapter complies
with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable; always use the
grips on the plug.
• When setting up the product, make sure that the cables are not pinched, kinked or damaged by
sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses a
risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
26
