Euroboor TUBE.30, Руководство оператора

Страница: 14 / 31

14
4. Using the machine
WARNING:
Always observe the safety instructions and applicable regulations.
WARNING:
To reduce the risk of serious personal injury, turn tool off and disconnect tool from
power source before making any adjustments or removing/installing attachments or accessories.
4.1 Control panel
The control panel on your magnetic drilling machine is designed for maximum operating facility and
safety.
4.2 Magnet base
By combining Magswitch’s rotating magnet technology and EUROBOOR’s magnetic drilling unit, we have
created a tool that is capable of quickly and safely drilling on contoured and flat surfaces. Magswitch
magnets allow for a much more efficient field on thinner material, allowing more consistent tip forces.
The attachment force generated by the magnets depends on various factors:
- Thickness of the material
- Material grade
- Pain or coating of the material the magnet is placed on
- Metal chips, oil or other dirt under the magnet
As guideline on regular construction steel:
- Minimal required material thickness 3.0 mm (1/8")
- Full saturation as from material thickness 12.5 mm (1/2")
Make sure that both magnet arrays attach tightly to the workpiece before turning on the motor unit of
the magnetic drilling machine.
For placement on the outside of a pipe, a minimum outer diameter of 76.2 mm (3") is required.
Always use the safety chain included. Drilling above your head is extremely dangerous and is not
recommended.
[image 4-1]