16
WARNING:
Do not use this machine when LED indicator is RED. Magnet may not generate
sufficient attachment force
We need to point out that this is only an indication and not a certainly that the magnet will not
release from the material. Euroboor accepts no liability ensuring from the magnet indicator not
functioning or functioning poorly.
Make sure that the magnet attaches tightly to the work piece before turning on the motor unit of the
magnetic drilling machine. Euroboor magnets have 2 coils; make sure that both coils are in contact
with the material. Do not connect any other machines to the electrical outlet the magnetic drilling
machine is plugged into, as it may result in the loss of magnetic force.
Always use the safety chain included. Drilling above your head is extremely dangerous and is not
recommended. For the use of magnetic drilling machines on pipes, not-flat or non-magnetic
materials, we refer to our brochure or our website www.euroboor.com where several vacuum
tightening systems and pipe clamping systems are mentioned.
4.4 Switching fitted hand drilling machine on and off
The fitted hand drilling machine can only be switched ON when the magnet is activated. To switch
the motor ON, press the green button with marking “I”. To switch the motor OFF, press the red
button with marking “O”.
Be aware that on/off control of the fitted hand drilling machine by the magnetic drill stand can only
be executed when the on/off switch of the hand drilling machine itself is in ON position.
4.5 Tool lubrication
IN HORIZONTAL, VERTICAL AND OVERHEAD APPLICATIONS
Dip the twist drill bit in cutting paste or apply an appropriate spray.
Make sure to use only suitable cutting oil or fluid. Euroboor offers a wide range of cutting lubricants
for all tool and material combinations. Proper cooling will help you create better and faster results,
and extend the lifetime of your tools.
www.fnglob.pl
