www.euroboor.com
18
4.2 Operating instructions
For operating the tool, please follow the steps below.
1.
Lubricate the tool before operating. Please refer to “5. Maintenance”.
2.
Prepare the tool, inserting the cutting plates as described in
“3.1 fitting the
cutting
plates
”
and
“3.2
adjusting the bevel
depth”
WARNING:
Only use accessory’s that are recommended by Euroboor
.
3.
Insert the supplied air nipple into the machine.
4.
Connect the air supply to the tool. Make sure the air coupling is set in place and no air
is leaking.
5.
Before working the tool make sure the air flow adjustment lever is
set in the desired position. See [image 4-1]
6.
Once the air connection is in place and the correct air flow rate has
been chosen, the tool is ready to be operated. Operating the part
can be done by pressing the trigger-block forward.
KEEP CLEAR THE ROTATING PARTS WITH HANDS, CLOTES, HAIR OR ANY OTHER
LOOSE OBJECTS.
Note:
Lubricate the tool before operating
. Please refer to “5. Maintenance”.
After lubricating
the tool, let it run freely for 30 seconds in order to distribute the oil through the machine.
7.
After finishing the workpiece: Disconnect the machine from the air supply.
[image 4-1]
