www.euroboor.com
8
2.
PERSONAL SAFETY
a)
Check the plug, cable and machine for damage each time using the machine
b)
Remove the plug from the plug socket before undertaking an maintenance work on the
power tool
WARNING:
Risk of injury from high-temperature chips.
c)
Never touch the tool holder and keep all vulnerable body parts clear while the machine is
running, as high-temperature chips are expelled at high speed during operation
d)
During operation, always guide the machine in a direction away from the body
e)
Do not use the machine above your head
WARNING:
Risk of injury to hands.
f)
Do not reach into the processing line with your hands
g)
Use both hands to hold and operate the machine
WARNING:
Dust created by bevelling may harm your health.
h)
Some types of dust, such as dust from lead-based paint, is known to cause cancer, birth
defects or other reproductive harm. Risk varies on exposure and should always be reduced
by working in a well-ventilated area and by making use of approved safety equipment,
such as dust masks specifically designed to filter out microscopic particles
WARNING:
Never machine materials which contain asbestos.
i)
Only use recommended squar
e carbide inserts (“cutting plates”), rated at the machine’s
maximum cutting rate or higher
j)
Do not use dull or damaged cutting plates to prevent excessive friction and load, and thus
to prevent damage to and failure of the machine
k)
Maintain labels and identification plates, as they carry important information. If
unreadable or missing, obtain replacement
