EURO EVC60SS, Инструкции по эксплуатации и монтажу

Страница: 10 / 24

3
2
1
L
N
4
5
PE
3 x 2.5 mm 220 V
3 x 2.5 mm 230 V
3 x 2.5 mm 240 V
Its outside surfaces heat while your appliance operates. The interior surfaces of
oven, components that ensures the heat and steam that goes out are quite hot. Even
if the appliance is turned off, these parts hold its heat for a specific time. Do not touch
onto the hot surfaces. Keep children away.
Do not leave the cooker while cooking with solid or liquid oils. There may be flaming
up on condition of extreme heating. Never pour water to the flames occuring from oil.
Cover the saucepan or frypan with its cover in order to choke the flame that was
occured in this case and turn the cooker off.
The oven and heat adjustment switches must be adjusted and oven’s clock must
be programmed for cooking in your oven. Otherwise the oven does not operate.
Do not leave anything on it when the door or drawer of oven is open. You may
unbalance your appliance or break the cover.
Do not put heavy things or flammable, burnable goods (nylon, plastic bag, paper,
cloth etc.) into the lower drawer.
Protect your appliance against atmospheric effects. Do not leave it to effects
such as sun, rain, snow, powder etc.
Your appliance is produced in accordance with the related security instructions
connected with electrical appliance. The maintenance and repair works must be
made just by the authorized service technician who is trained by the producer firm.
The installation and repair works whitout following rules may endanger you.
3. 4 GENERAL WARNINGS AND MEASURES
9
3.3 ELECTRIC CONNECTION AND SECURITY
During the electric connection carefully follow the instructions below.
The appliance must be connected to the earthing system of the installation.
The supply cable must not touch the hot surfaces of the appliance.
If the supply cable becomes damaged, contact a qualified service agent immediately.
The appliance is designed to be connected to 240V single phase supply, please
ensure that the correct supply is available before connection.
For fixed wired installations, means of disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.