EURO EG600FS2X, Руководство по использованию, установке и настройке

Страница: 20 / 24

20
461308002 (RS-001) 05/201
1
�
�
�
23
22
24
OVEN THERMOSTAT (fig. 22)
Reduced rate adjustment should be carried out in
the following way:
• Remove the knob thermostat.
• Switch on the oven burner by turning the relative
knob to the Maximum position, then wait about 10
minutes.
• Slowly turn the knob back to the Minimum position
and, using a small screwdriver (C), turn screw (V) to
the right to lower the flame or to the left to increase
it. The flames must be short for an efficient Reduced
rate setting. They must be stable to prevent them
from accidentally going out and must be able to
stand up to normal oven door manoeuvres.
OVEN BURNER (fig. 23)
The burner is installed on the oven base and is covered
by the bottom plate which must always remain in that
position during oven operation,
To adjust the primary air, is performed when the
burner is ignited, by adjusting the sleeve (B) and
unscrewing screw (A). Lock screw (A) in place once
the adjustments have been made.
GRILL BURNER (fig. 24)
To adjust the primary air, is performed when the
burner is ignited, by adjusting the sleeve (M) and
unscrewing screw (V). Lock screw (V) in place once
the adjustments have been made.
INSTRUCTIONS FOR THE INSTALLER