EURO 500 DOUBLE WIDTH ASSEMBLY GUIDE
1. Insert the castors into the adjustable legs.
Insert 2 legs and castors into each 2 rung
frame.
2. Fit one horizontal brace on the plain side
of the frames to the vertical of the frames
above the 1
st
rung connecting the 2 frames
together.
3. Fit another horizontal brace on the ladder
side of the frames face down onto the 1
st
rung.
Note:
when standing inside the frames
looking at the ladder frame, the ladder should
be to the left hand side.
4. Fit the next set of frames onto the base,
ladder frames run continuously up the left
hand side.
Note:
see kitting page for frame
5. Add 4 diagonal braces from the 1
st
to 3
rd
and 3
rd
to 5
th
rungs as shown, level the tower
using a spirit level as a guide.
6
.
Fit the 4 stabilizers supplied with your
tower.
Note:
Always fit 4 stabilizers unless
building in a corner, inner stabilizers fit
parallel to a wall. See kit list for correct size
required to build your tower.
7. Fit a trapdoor platform to the 4
th
rung,
trapdoor to the ladder end.
Note:
Platforms
are positioned every 4 rungs.
8. Climb the ladder inside the tower and sitting
through the trapdoor fit 4 horizontal braces
face down onto the 1
st
and 2
nd
rung above the
platform to form your guardrails, as shown.