background image

 

 

 

Maintenance 

 

The following recommendations are made for maintenance and essential repair work to achieve the 
maximum efficiency of the door throughout its economical working lifetime.

 

 

Maintenance Frequency 
 

 

To ensure safe and reliable operation, regular inspection and maintenance is essential.  

 

The frequency of maintenance depends on the frequency of usage.  

 

Service maintenance should be carried out by fully trained and competent door installation 
engineers.  

 

It is advisable to encourage personnel to report any damage or defects noticed during day to 
day usage.  

 

Prompt repair actions will avoid any unnecessary over stressing of components and can greatly 
prolong the useful life of the door. 

 

 One cycle is Opening / Closing of the Roller Shutter one time. 

Guidelines for maintenance schedule

 

Cycles per day

 

Service by a specialist Engineer required : 

 

More than  45 cycles per day  

Every 2 months 

More than 30 Cycles per day 

Every 3 months 

More than 15 cycles per day 

Every 4 months 

Less than 15 cycles per day 

Every 6 Months 

 

  Maintenance - By the User 

  On a daily basis, the user should ensure that

 

 

There is no damage to parts of the door

 

 

Excessive force is not required to operate the door.

 

 

Any damage or force required to operate the door is reported and action taken in respect of 
repairs required.

 

 

Components of the door are clean and free of built up dust and dirt.

 

 

Any bottom tracks are free from debris and if not, cleaned out.

 

 

They are fully conversant and comply with the operating and safety instructions.

 

 

Maintenance - By a Specialist Engineer 

On the maintenance schedule basis the specialist engineer should carry out the items mentioned in      
section A, B & C and in addition should follow as per below: 

 

Check all fixing bolts and fitting screws/bolts are tight. 

 

Generally clean the faces of the doors. Wipe any excess lubricant from the track. 

 

Содержание Rolling Shutter







Отзывы: