8
Cleaning Instructions
Warning:
Always
remove the plug
from the wall socket before cleaning.
Allow the deep fryer and the oil to cool
completely (approximately 2 hours)
before cleaning.
Never
immerse the
control panel, cord or plug in water or
any other liquid.
To clean your deep fryer and it parts,
always
follow the instruction under the
section “Cleaning Prior to First Use”.
•
Do not
place the control panel, cord
or plug in the dishwasher.
•
Clean the control panel with a
damp cloth
only
.
•
The oil reservoir, frying basket, and
lid cover can be washed on the top
rack of a dishwasher.
•
The body of the deep fryer can be
washed in warm soapy water.
Do
not
put the body of the deep fryer in
the dishwasher.
Detachable Power Cord
Your deep fryer has been specifically
designed with your safety in mind. Your
deep fryer features a detachable power
cord. This power cord is designed to
break away from the fryer body in the
event that the cord is inadvertently
pulled or tugged. This safety feature is
intended to prevent the deep fryer from
accidentally tipping over and
dangerously spilling the hot oil inside.
To attach the power cord:
1. The male receptacle
for the power cord is
permanently attached
to the rear of the
control panel. (Fig. 9)
2. To connect the female
power cord plug to the
male receptacle on the appliance,
orient the female plug so that it
mates with the male receptacle.
Note:
The female plug can only be
inserted one way. If the female plug will
not go into the receptacle on the
appliance, rotate the male plug 180°.
IMPORTANT:
Should the magnetic
plug become detached from the
appliance during use, it is important to
do the following:
1. Unplug the power cord from the
electrical outlet.
2. Turn the safety timer to zero and turn
the temperature control to the “Off”
position.
The Reset Feature
Your deep fryer is equipped with a reset
feature. If for some reason the deep
fryer stops heating, the reason may be
that the reset switch has tripped.
To reset the deep fryer:
1. Push the thermostat reset button
located on the back of the control
panel with a ball point pen or pencil.
(Fig. 10)
2. The unit will beep to indicate that it
has reset and you may resume
cooking.
Fig. 9
Reset
Button
Fig. 10
•
When oil is used mainly to fry
potatoes, and is filtered after each
use, it can be used up to 8 to 10
times.
•
Do not
use the same oil for more
than 6 months.
•
Always
replace all oil when it starts
to foam when heated, when it’s color
becomes dark, when it has a rancid
smell or taste, or when it becomes
syrupy.
•
Make sure that the food to be fried is
as dry as possible.
•
Always
remove loose ice from
frozen food before frying.
•
To cook evenly, pieces should be the
same size and thickness.
•
Thicker pieces will take longer to
cook.
3. Re-attach the power cord to the
receptacle at the rear of the
appliance.
4. Re-connect the power cord to the
electrical outlet.
5. Resume cooking.
OPERATING INSTRUCTIONS
1.
Filtro incorporado
2.
Ventana de observación
3.
Tapa
4.
Mango de la canasta freidora
5.
Canasta freidora
6.
Recipiente del aceite
7.
Cuerpo (gabinete)
8.
Asas del cuerpo (x2)
9.
Bordes guía
10. Elemento calefactor
11. Panel de control
12. Temporizador de seguridad
13. Luz de encendido
14. Luz de listo
15. Control de temperatura
16. Cable desmontable
(no se muestra)
Especificaciones Técnicas
Voltaje:
120V, 60Hz.
Potencia: 1650 Vatios
* El dibujo puede no ser igual al producto real.
11
PARTES DE SU FREIDORA DE INMERSIÓN
