80
GB
Fig.1 Fig. 2
Laying the power cord
Mount the саblе and the саblе clip (4) on the middle tubing (5) by pushing
them on.
Fig. 3
Install the wheel (Fig. 4, 5)
Remove the pre-assembled split pin (b) and the washer (a). Place the wheel
(7) on the wheel holder (c). Secure it with the washer (a) and the split pin (b).
Then mount the wheel сар (16). (Assembly is identical on both sides)
Fig.4 Fig.5
Blade roller installing / uninstalling (Fig.6)
Push the tine (8) on the transmission shaft of the machine. The tine (8) can
be mounted left or right side. Ве sure that the holes of the tine (8) and the
transmission shaft are aligned.
Pushed screw (9) through the hole and secured with the nut (10).