![Euro garden 159847.01 Скачать руководство пользователя страница 39](http://html1.mh-extra.com/html/euro-garden/159847-01/159847-01_original-instructions-manual_2436338039.webp)
39
EN
Switching on/off
1. Place the lawnmower on a level surface.
2. Lift the cover (8) on the housing.
3. Insert the battery pack (18) and the safety key (9) in its position (Fig. H).
4. Before switching the lawnmower, make sure that it is not touching any objects.
5. To switch on the lawnmower, press and hold the lock-off button (16) of the switch box
(15), squeeze the two start handles (17) and release the lock-off button (16).
6. Release the start handles (17) to switch off the lawnmower.
WARNING!
The cutting blade will continue to rotate for several seconds even after the motor has
been switched off. Do not touch the cutting blade until it completely stops.
Setting the cutting height (Fig.I)
The lawnmower has 6 positions for adjusting the cutting height
Position 1 -30mm cutting height
Position 2 -40mm cutting height
Position 3 -50mm cutting height
Position 4 -60mm cutting height
Position 5 -70mm cutting height
Position 6 -80mm cutting height
1. Put the lawnmower on the flat surface.
2. Grip the lever for cutting height adjustment (7) and move it past the ratchet mechanism
to the desired cutting height.
Checking the filling level indicator
∫ There is a filling level indicator (31) on the side of the grass collector (12).
∫ Filling level indicator open: Grass collection box is not full.
∫ Filling level indicator close: Grass collection box need to be empty.
Working with the lawnmower
Regular mowing stimulates the grass to an increased leaf formation, while at the same time
killing the weeds. Therefore, the lawn becomes denser after each mowing process. The first
cut takes place roughly in April when the grass is about 70-80mm high. During the main
growing season, the lawn is mowed at least once a week.
∫ Move the lawnmower at waling speed and in lines which should be as straight as
possible. For a flawless mowing result, the lines should always overlap by a few
centimetres.
∫ Adjust the cutting height and empty the grass collector often so that the lawnmower is
not overloaded.
∫ Always move across slopes crosswise. Take special care when going backwards and
pulling the lawnmower.