40
EN
will audibly snap in.
Checking the battery charging level
The battery comes with an integrated battery level indication.
The battery status is displayed as follows by the three LEDs of the battery level indication
(LED) (13):
LED color
Meaning
Green-Orange-Red
Maximum charge/power
Orange-Red
Medium charge / power
Red
Weak charge – Recharge the battery
Press on the battery charge level button (12) on the battery pack (11). You can read the
battery status from the battery level indication (LED) (13).
Attaching/Replacing cutting blade
WARNING! Risk of injury. Always switch the appliance off and remove the battery
pack before attaching or replacing the cutting blade.
Attaching
1. Press and hold the blade release buttons (9) on both sides of the grass shear or trimmer
unit (3 or 5) (Fig.C)
2. Slowly approach the grass shear (3) or trimmer (5) unit onto the plug-in connector (10)
on the bottom side of the device head (2) (Fig.D).
3. Push the grass shear (3) or trimmer (5) unit into the direction of the device head (2). It
will lock into place audibly.
Replacing
1. Press the blade release buttons (9) on the both sides of the c grass shear or trimmer
unit (3 or 5) and remove the unit.
2. Put on the desired cutting blade unit as described in “Attaching the cutting blade”.
OPERATION
Note:
Comply with regulations regarding noise protection and local rules. Using the
appliance on certain days (e.g. on Sundays and public holidays) during certain times (midday
period night time) or in certain locations (e.g. health resorts, clinics, etc.) may be restricted
or prohibited.
Switching on and off
Note: before using the appliance, the blade cover has to be removed from the cutting
blade unit.
Switch ON
1. Push the safety lock-out (7) forward and press the ON/OFF switch (8).
2. Release the safety lock-out (7) now, and hold the ON/OFF switch (8) to run the
appliance.
