40
EN
Note: if the quick release (2) does not have enough tension, this can be tightened with hex
key (20)
Adjusting the motor unit angle (Fig. F)
For high and low cutting, you can adjust the angle of the motor unit (13) in 15º steps from
45º to -90º.
1. Remove the battery pack (8) from the hedge trimmer;
2. Press the release button for cutting angle (12).
3. Adjust the angle of the motor unit (13) in the desired direction.
4. Let go of the release buttons (12) and the motor unit (13) will click into place.
5. Re-place the battery pack (8) on the hedge trimmer.
Working Position
The hedge trimmer can be operated in 4 different working position.
Lateral cutting
High vertical cutting
Содержание 154708.01
Страница 2: ...A B 9 10 8 6 1 2 3 4 5 7 12 13 14 9 10 11 11 15 16 17...
Страница 3: ...C E D F 18 19 20 18 4 1 2 12 13...
