GB
- 47 -
can be. Longer power cables require larger con-
ductor cross-sections. Power cables and connec-
ting lines must be regularly checked for damage.
Ensure that the lines are de-energized before
checking them. Completely unwind the power
cable. Also check power cable entry points, plugs
and socket couplers for kinks.
6. Operation
Connect the power cable to the power plug (Fig.
1/Item 7) and secure the power cable with the
cable stress-relief clip (Fig. 7). Use the fasteners
(cable holders) for the power cable.
Caution!
To prevent the machine switching on accidentally,
the lawn mower is equipped with a safety switch
(Fig. 7/Item 1) which must be pressed before the
ON switch (Fig. 7/Item 2) can be activated. The
lawn mower switches itself o
ff
when the switch is
released.
Repeat this process several times so that you are
sure that the machine functions properly. Before
you perform any repair or maintenance work on
the machine, ensure that the blade is not rotating
and that the power supply is disconnected.
Warning! Never open the discharge
fl
ap if the
grass box is being emptied and the motor is
still running. The rotating blade can cause
serious injuries.
Always secure the discharge
fl
ap and grass bag
carefully. Always switch o
ff
the motor before you
remove these items.
The safety distance between the blade casing
and the user provided by the guide struts must be
maintained at all times. Take special care when
mowing and changing direction on embankments
and slopes. Ensure that you have a secure sur-
face to stand on, wear shoes with anti-slip soles
that o
ff
er good grip, and long trousers.
Always mow across the slope (not in up or down
direction). Do not use the mower on gradients
exceeding 15° for safety reasons.
Take special care when moving backwards and
pulling the lawn mower. Danger of stumbling.
Tips for proper mowing
It is recommended that you overlap the mowing
swaths.
Only use a sharp blade that is in good condition.
This will prevent the grass blades from fraying
and the lawn from turning yellow.
Try to mow in straight lines for a nice, clean look.
The swaths should overlap each other by a few
centimeters in order to avoid stripes.
How frequently you should mow your lawn is
determined primarily by the speed at which the
grass grows. In the main growing season (May
- June) you will probably need to mow the lawn
twice a week, otherwise just once a week. The
cutting height should be between 4 - 6cm and the
amount of growth before mowing again should be
4 - 5cm. If the grass is allowed to grow somewhat
longer for whatever reason, do not make the mis-
take of cutting it back to the normal height in one
go. This will harm the lawn. Never cut it back by
more than half the height in one go.
Keep the underside of the mower housing clean
and remove grass build-up. Deposits not only
make it more di
ffi
cult to start the mower; they
decrease the quality of the cut and make it harder
for the equipment to bag the grass.
Always mow along inclines (not up and down).
You can prevent the lawn mower from slipping
down by holding a position at an angle upwards.
Select the cutting height according to the length
of the grass. Make several passes so that no
more than 4cm of grass are cut at one time.
Switch o
ff
the motor before doing any checks on
the blade. Keep in mind that the blade continues
to rotate for a few seconds after the motor has
been switched o
ff
. Never attempt to manually
stop the blade. Regularly check to see if the
blade is securely attached, is in good condition
and is sharp. If the contrary is the case, sharpen
the blade or replace it. In the event that the blade
strikes an object, immediately switch o
ff
the lawn
mower and wait for the blade to come to a com-
plete stop. Then inspect the condition of the blade
and the blade mount. Replace any parts that are
damaged.
Lay the power cable on the ground in loops in
front of the power outlet. Mow away from the po-
wer outlet and cable, making sure that the power
cable always trails in the mowed grass so that the
lawn mower does not travel over the cable.
Anl_ES_EM_1032_SPK7.indb 47
Anl_ES_EM_1032_SPK7.indb 47
30.11.2018 10:12:39
30.11.2018 10:12:39
Содержание 149809.01
Страница 54: ...54 Anl_ES_EM_1032_SPK7 indb 54 Anl_ES_EM_1032_SPK7 indb 54 30 11 2018 10 12 39 30 11 2018 10 12 39...
Страница 55: ...55 Anl_ES_EM_1032_SPK7 indb 55 Anl_ES_EM_1032_SPK7 indb 55 30 11 2018 10 12 41 30 11 2018 10 12 41...
Страница 56: ...EH 11 2018 01 Anl_ES_EM_1032_SPK7 indb 56 Anl_ES_EM_1032_SPK7 indb 56 30 11 2018 10 12 41 30 11 2018 10 12 41...
