19
SETTING UP THE MACHINE
MOUNTING THE SQUEEGEE
VERSIONS: E51 V1 BASE-E51 V2 TRAC-E51 V3 ECO-E61 V2 TRAC-E61 V3 ECO-
M510 V1 BASE-M510 V2 TRAC-M510 V3 ECO-M610 V2 TRAC-M610 V3 ECO
Follow the instructions below to mount the squeegee to the machine:
park the machine on a flat surface, put on the brake (if available) and remove the key (if available);
1
Position the squeegee lever into position 1 (raised
position).
A
B
C
Fit in the squeegee (position A) into the squeegee
support (position C).
Once the squeegee is fitted completely, secure the
knobs (position B).
1
2
Connect the squeegee hose from the straight side
(position 1) into the special seat located on the
bottom of the tank and press down hard until it fits
into place completely.
Mount the other end of the hose, from the roll-up
side (position 2) into the squeegee.
ADJUSTING THE SQUEEGEE
VERSIONS: E51 V1 BASE-E51 V2 TRAC-E51 V3 ECO-E61 V2 TRAC-E61 V3 ECO-
M510 V1 BASE-M510 V2 TRAC-M510 V3 ECO-M610 V2 TRAC-M610 V3 ECO
1
2
3
There are 2 types of adjustments that can be carried out on
the squeegee:
Inclination adjustment
(ALL VERSIONS) with knob
(position 1).
It adjusts the inclination of the squeegee in order to have
a constant pressure over the entire length of the blade
(position 2).
Turn the knob counter-clockwise if there is too much
pressure on the outer points and little pressure on the
central area.
Turn the knob clockwise if there is little pressure on the
outer points and too much pressure on the central area.
To make the adjustment lower the squeegee, turn on the
suction fan and drive forward slowly. Examine the
pressure distribution on the blade and if necessary
correct the inclination as described above.
Pressure adjustment (EXCEPTION MADE FOR BASE VERSION)
using the knob in position 3
(not included in
the basic version).
This allows for optimal pressure on the blade (position 2) which can be adjusted for each type of floor and for each
type of blade.
For rough floors or uneven floors, increase the pressure by turning the knob (position 3) clockwise.
For smooth floors, lower the pressure by turning the knob counter-clockwise.
