background image

Upright Vacuum Cleaner
Owner’s Guide
4650 & 4680 Series

Household Type

Index

Important Safeguards ................. 2
Service Information ..................... 4
Assembly ................................. 5-6
Thermal Cut Off .................... 4 & 7
Use .............................................. 7
Accessories ................................. 8
Dirt Alert ...................................... 9
Cyclonic Dust Cup ............... 10-11
Brush Roll ................................. 12
Brush Roll Belt .......................... 12
Hose Blockage .......................... 13
Filters ........................................ 14
HEPA Filter ................................ 14
Light Bulb .................................. 15
Problem Solving ........................ 17
Warranty .................................... 18
Customer Order Form ............... 19

IMPORTANT

Do not return this

product to the store.

For assembly problems or
questions contact:
 Eureka’s
Customer Service Division toll
free at 1-800-282-2886*, 7 a.m.
to 8 p.m., Central Standard
Time, Monday through
Saturday.
For replacement of broken
or missing items
 to be
shipped direct to you, call
1-800-438-7352*, 8 a.m. to
4:45 p.m., Central Standard
Time, Monday through Friday.

*En Mexico llame al 5670-6169

www.eureka.com

Содержание 4650 Series





















Отзывы: