2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
How to Identify Parts of Vacuum Cleaner
HEPA filter
DCF 10/14
Standard filter
DCF10
Power Paw
®
(some models)
Cord retainer
Dust cup
Filter
Floor nozzle
‘Check brush roll’ light
Dust cup release button
Dusting brush
Hose connector
Lock button
Hose retainer
Hose
Telescopic handle
Crevice wand
Hose/floor suction control
Lower cord wrap
Upper cord wrap
Telescoping handle release
Handle
Hose holder
Maintenance Schedule
Maintenance Schedule is also located on back side of dust cup.
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.
DUST CUP – Empty after each use
FILTER – Check regularly; clean as needed
REPLACE FILTER – Replace within 3 - 6 months
Remove dust cup.
Twist lid
counter-clockwise to open.
Snap filter back into lid.
Twist lid clockwise
to lock.
Press ‘release cup’
button.
Lift off dust cup lid with
attached filter.
Empty dust cup.
Shake and brush dust
and dirt from filter.
Push filter latch to
remove filter.
Align
Top
Standard dust cup filter – DCF10
HEPA Filter DCF 10/14
Choose HEPA for better filtration
Power switch
Align
Top
Align
Top
