TECHNICAL INSTRUCTION MANUAL: TRADITIONAL PARTY CANOPIES
©2014 Johnson Outdoors Gear, Inc.
www.eurekapartytents.com
Rev. H - May 2014
5. If using sectional aluminum poles, assemble them and make sure
each snap button is secured.
NOTE: Side poles are two equal length pieces. The top piece has the
pin and the bottom piece has a black end cap. Center poles will have
a top (pin) piece, middle pieces that are open on top and bottom and a
bottom piece with a black end cap.
6. Next, install the side poles from the underside of the canopy. Insert
pole pins up through both the grommet and D-ring.
7. Stand the poles up at a 60˚ angle with their base toward the center
of the tent. Set the corner poles first, then the side poles.
8. With the all of the side poles set, walk under the tent and insert
center pole pin into the grommet at the top of the canopy. With this pin
in place, lift and push the pin end skyward and the center pole base
toward center of tent to raise the pole and canopy.
