Note: Storage Tank of this product must be periodically (at least once in every 30 days) cleaned by a
disinfectant. Disinfection Tablets may be purchased from the Company authorized Service Centre.
Please follow the disinfection process strictly as per the instructions as provided in this User
Manual.
1.
Switch Off the power supply to the
purifier
when the tank is full. Stop the water supply to the unit
(by removing the raw water inlet pipe from the Diverter Valve). Remove the top cover of the
purifier
unit.
2. Disengage the pure water inlet pipe of storage tank (shown in the pics.)
3. Drop one disinfection tablet into the opening of the inlet connector of tank. CAUTION : Keep
away the disinfection tablets out of reach of children. Do not eat/consume this disinfection tablet.
4. Snug
fit
the pipe and leave the unit for 30 min.
5.
After 30 min. open the faucet and discard the
purifier
tank water completely. CAUTION: Do not
drink this water. Check if the tablets has completely dissolved. If not, then discard the leftover pcs.
of tablet.
6. Switch On the power to the unit and insert back the raw water inlet pipe into the diverter valve as it
was before.
7.
Let the
purifier
tank get completely
filled.
Discard this
fill
too.
8.
Allow the tank to get
filled
again. Now your Smart Plus RO+ UV+MTDS is ready for use. You can
start using this water. in case you notice any medicinal taste/smell then discard the water and let it
refill
again.
9.
Please ensure that this disinfection process is carried out by the authorized installation person /
service technician during
first
installation and in every subsequent mandatory servicing of your
product.
1000
