24
1
2
3
4
5
6
7
8
9
10
4. DESCRIPTION OF THE EST FANCOIL UNITS
The EST fancoils are units for heating and cooling application (excluding ESTPH and ESTPH/
AF models, which can be used for heating only); they are fed with hot and cold water and
used according to their respective performances features.
fancoil units are components of the heating and/or cooling systems, consequently, they
are without any safety devices on the water circuit. These units have been designed for
temperature until 85 °C. When you want to connect the fancoil to a condensing unit in
cooling mode, it must be ordered with a direct-expansion coil (optional upon request).
The EST fancoils can be installed on wall, on floor (with optional feet) or concealed.
TYPE OF INSTALLATION ON WALL
ON CEILING
CONCEALED
Model
ESTSV, ESTSV/AF,
ESTPV, ESTPV/AF,
ESTSVR
ESTSH, ESTSH/AF,
ESTPH, ESTPH/AF
ESTCV, ESTCV/AF,
ESTCH, ESTCH/AF,
ESTCVR
4.1 COMPONENTS
For identifying the components of the EST fancoil you have purchased (basic unit), see the
exploded drawings on Enclosure 1/A ÷ 1/C of this manual.
Enclosure 4 (Fig.1) shows the ESTCBL00, standard electric panel.
Enclosure 2 shows the possible configurations of installation.
4.2 TECHNICAL SPECIFICATIONS
The technical data directly referred to the unit purchased are shown on the identification
tag (fig. 1) located at the internal side of the machine. Technical specifications (standard)
concerning installation and use of fancoil units are listed on Enclosure 3 of this manual.
+
Fig. 1 Label on fancoil
