Euphonix TT007 Operation Manual
TT007 Menu Modes
12
Table 2-1
Port Modes
* Proprietary protocol for Studer D820 and D827 control
** Timebase synchronization is based on LTC signals received at the TcR Port. Longitudinal Time
Code (LTC) signals are typically audio reference tracks on the Master machine.
NOTE:
The TT007’s TcG should always be set to Slave if not selected as Master.
2.1.1
Machine Menu
Pressing a Port key twice accesses the Machine Menu. The first press displays the Port
Menu screen; the second press displays the Machine Menu. In the Machine Menu, the
PREV
and
NEXT
keys scroll the available parameters, which vary based on whether
the Port is configured as a Master or Slave:
Record
OFF
Safe (Recording disabled)
EDIT
Insert recording over audio tracks only
ASSEMBLE
Overwrite sync track, video, and audio tracks
Track Arm
OFF
No Track Arming Request is translated to port
ON
Any analog or digital Track Arm Request is translated to port
D=A
Converts analog Track Arm Requests to equivalent Digital Requests
48 no tally
For use with Pro Tools. Since Pro Tools does not output track tallies
when in record, the tallies generated by the TT007 are not current if
track arming is changed while Pro Tools is in motion; they are just
the last known state.
Port
Available assignments
Symbol in Port
Assignments
Display
M1-M3
OFF / Controller / Slave / Master
c / s / M
S1-S3
OFF / Controller / Slave / Master
c / s / M
S1 (additional)
LynxNET (Master) / Lynxnet (Slave) / EsBUS* / A-Smith
T / t / E / A
TcG
OFF / Slave / Master
s / M
TcR
OFF / FromMaster** / Master
m / M
Resolve (Vi)
VIDEO / Free run
R / –