Euphonix System 5B, Руководство по эксплуатации

Страница: 114 / 156

System 5-B Digital Audio Mixing System Operation Manual Channels and Strips
114
8.4 Channel Process Order and Patch Points
The seven process functions can be placed in any order to suit different applications.
The default order is Delay, Metering, Insert, EQ, Filters, Dynamics, and Fader. The ten
patch points are A Input, B Input, Insert Send/Return, Pre-fader Output, Post-fader
Channel Output, Dynamics Key Input, Dynamics Side-Chain Link In/Out and Mix Mi-
nus Output (see Figure 8-15). All patching can be done from PatchNet (see Chapter 4:
eMix Application ). The A, B, and Key channel inputs can be assigned from the Strip.
.
Figure 8-15 Channel processor order and patch points
To display the configuration controls for processor order and patch points:
1. Press the Input function key to assign the Input controls to the knobs.
2. Press both cfg WX keys simultaneously to display the configuration pages for
patching and processor order on the knobset.
The cfg keys flash in configuration mode.
3. Use the
WX
keys individually to display the two configuration pages.
EQ
Function
4 of 7
Function
5 of 7
Function
6 of 7
Function
7 of 7
Pre-Fader
Output
Solo
PFL/AFL
Aux
Sends
Group Busses
Matrix/Clean Feeds
Main Busses
Program/Sub Groups
Sys
te
m Buses
Channel Output
Mix Minus Output
Fader
& Mute
Any
Order
Insert
Function
3 of 7
Function
2 of 7
Delay
DYN
Pan
Pan
Key
Link
Trim & Phase
Input Select
Channel Inputs
A B
Function
2 of 8
Function
1 of 7
Meter
Mix Minus
Processing
Filters