Euphonix System 5 Hybrid Pilot Operation Manual
Console/Workstation Operations
26
8.
Repeat the process to add up to four controllers.
9.
When finished adding controllers, click the
OK
button to close the dialog in
Final Cut Pro. In Soundtrack, click the
Close
button at the top left to close the
Preferences.
10.
Restart the application or computer if initial communication is not achieved.
The Hybrid connects and updates with new track information.
2.8
DAD AX24 Microphone Preamplifier
Figure 2-9
DAD AX24 mic preamp
The DAD AX24 is a high-end
EuCon-ized
mic preamp from Digital Audio Denmark.
The AX24’s parameters can be controlled from the Hybrid surface, including: Mic/Line
switching, Preamp Gain, Phantom On/Off, Phase, Mute, Channel Delay and Mono/Ste-
reo linking. The AX24 must be connected to the workstation computer via USB link
(available from DAD).
To enable EuCon in the DADMan software:
1.
Open the DADMan Software on your workstation
2.
Initiate USB communication with the device from the list of devices on the left
of the DADMan window.
3.
Enable
Eucon Controls
from the
File
menu.
4.
When the DADMan software is the focused application, its controls are dis-
played on the Input Knobset on the Hybrid surface.
