Hardware Installation
2-4
CPU Setting
CPU Setting
CPU Setting
CPU Setting
CPU Setting
(jumperless & jumper setting)
After installing the CPU, you must set the clock selection jumpers to match the
frequency of the CPU. There are two ways for CPU setting:
jumper setting and
jumperless.
Find the jumpers labeled
JP12, JP19,
set these jumpers according to
the figure below and table for CPU Clock Frequency.
Caution:
we dont recommend user to try overclock, it may damage your
CPU and result in a slower speed. Please think carefully before
you use overclock function.
We introduce you how to clear CMOS, and enter into system BIOS, it could help you
accomplish CPU setting in BIOS easyly.
Clear CMOS:
Clear CMOS:
Clear CMOS:
Clear CMOS:
Clear CMOS:
JP4
JP4 CMOS
To Clear CMOS, please follow the steps below:
1.
Power off the system and unplug the chassis AC power cord.
2.
Short JP4 at pin 2-3 for few seconds.
3.
Set JP4 back to its Normal position at pin1-2
4.
Plug the AC power cord to the chassis.
5.
Power on the system and load the BIOS set up default.
Clear
CMOS
Default
(Normal)
