30
31
3
Open the water inlet cover to fill the water tank, then close the cover.
• Do not use floor cleaner or detergent which may block the filter
elements.
4
Install the water tank into the bottom of RoboVac until a click is heard.
• The mopping mode is only intended for a clean floor without
stubborn stains. To achieve a better mopping effect, it is
recommended to clean the floor with RoboVac three times before
installing the mopping module.
5
Select a cleaning mode to start cleaning.
• RoboVac automatically sweeps and mops in the selected mode.
6
When RoboVac finishes working and returns to the Charging Base, press
the release button to remove the dust collector and the water tank.
7
Remove the water tank and put the dust collector back into the main unit.
• After mopping, remove the water tank, empty any remaining
water and clean the washable mopping cloth to prevent the cloth
becoming mildewed or producing a peculiar smell. The disposable
mopping cloth is for single-use only. For how to maintain the
mopping cloth and water tank, refer to the “Cleaning and
Maintenance” section in this manual.
