EUFY RoboVac R500, Руководство пользователя

Страница: 14 / 80

24 25
English English
Problems Solutions
The rolling brush
does not rotate.
• Clean the rolling brush.
• Check if the rolling brush and brush guard have been installed
properly.
RoboVac’s
movements or travel
path are abnormal.
• Clean the sensors carefully with a dry cloth.
• Restart RoboVac by turning the power switch off and on.
Error Tones
When RoboVac is in trouble, it will emit a series of short or long beeps and the red indicator
on RoboVac will be solid or flashing.
Flashing red indicator light
Error Tone Cause Solution
One beep
• RoboVac is stuck and one of the
wheels is not making contact with
the floor (hanging in mid-air).
• RoboVac may be in an extremely
large room and the bumper is not
registering obstacles.
Restart cleaning in a new location.
Two beeps RoboVac’s bumper is stuck.
Tap RoboVac’s bumper several times
to dislodge any debris that may be
trapped underneath.
Three beeps
• RoboVac’s drop sensors are dirty.
• RoboVac is stuck on the ledge of a
staircase and cannot reverse.
• Clean the drop sensors gently
with a dry cloth.
• Place RoboVac in a new location.
• Use a physical barrier to block off
the problem area.
Four beeps RoboVac’s power level is too low.
Manually charge RoboVac for at least
5 hours.
Solid red indicator light
Error Tone Cause Solution
One beep
RoboVac’s left/right wheel
is stuck.
Turn off RoboVac and remove any hair or
debris from the left/right wheel.
Two beeps
RoboVac’s side brush is
stuck.
Turn off RoboVac and remove any hair or
debris from the side brush.
Three beeps
RoboVac’s suction fan is
stuck.
• Turn off RoboVac, then remove and
empty the dust collector.
• Make sure the suction inlet is not
blocked by any hair or debris.
Error Tone Cause Solution
Four beeps
RoboVac’s rolling brush is
stuck.
Turn off RoboVac and remove any hair or
debris from the rolling brush.
Specifications
Product Model T2112
Input
19 V 0.6 A
Battery Voltage DC 14.4 V
Power Consumption 25 W
Battery Type
DC 14.4 V
Li-ion 2600 mAh
Dust Collector Capacity 0.6 L
Cleaning Time Max. 100 mins
Charging Time 300 - 360 mins
Input
19 V 0.6 A
Output
19 V 0.6 A
Customer Service
@EufyOfficial @EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong