- RoboVac will return to the Charging Base automatically when the power level becomes low or
when RoboVac finishes cleaning.
- By default, RoboVac starts in Auto cleaning mode when it is turned on.
●
Power Boost Feature
When the Power Boost feature is enabled, RoboVac will automatically increase the
suction power if it detects stronger power is needed to ensure the best clean. Power
Boost is ideal for cleaning thicker carpets and hard-to-sweep messes, which will reduce
the cleaning time, but increase the noise level. If the vacuuming noise caused by Power
Boost disturbs you, you can disable this feature. This feature only works in Auto cleaning
mode.
To adjust the default suction power in Auto Cleaning Mode, simultaneously press and
hold the
and
buttons for 2 seconds; you will hear a series of beeps that
correspond to the suction power selected. Repeat to adjust the suction power level.
Sound
Power Boost
Suction Power Level
One beep
×
Standard power
Two beeps
√
Automatically switch
between Standard and
Maximum power (default)
Three beeps
×
Maximum power
Note:
When RoboVac starts Auto cleaning the next time, it will clean according to the suction power
level you previously selected.
2. Spot cleaning
RoboVac intensively cleans a specific area in a spiral pattern. Useful if there is a concentrated
area of dust or debris.
In Spot mode, RoboVac will stop cleaning after 2 minutes.
Press
on the remote control to start cleaning in Spot Mode.
