14
6.8 TROUBLESHOOTING
Error/Fault
Possible cause
Assistance/solution
No function
The connector of the monitor cable has
not been inserted into the 12 V vehicle
socket.
Plug the connector of the charging cable into
the 12 V vehicle socket.
The fuse of the monitor cable connector
has been triggered and must be
replaced.
Plug the connector of the charging cable into
the 12 V vehicle socket.
The fuse of the 12 V vehicle socket has
been triggered and must be replaced.
Replace the fuse in the monitor cable
connector
The battery is empty
(only when used without charging
cable)
Use the charging cable to connect the
camera to the 12 V vehicle socket.
No saving
possible
The memory card has not been inserted
correctly
Insert the memory card properly
Write protection of the memory card has
been activated
Deactivate the write protection of the me-
mory card
The memory card is not formatted
Format the memory card (Format in section
6.5 Functions)
There is not sufficient memory space
Delete some files in order to free up memory
space
The memory card is defective
Try using a different card
The monitor
does not
show a clean
image
The lens of the camera is dirty
Carefully clean the lens
Strong light is acting directly on the lens
of the camera
As soon as the strong light dissipates, the
image quality will be OK
Incorrect light frequency set
Set the appropriate light frequency for
artificial light (Light frequency in section 6.5
Functions)
Camera does
not show a
sharp image
Camera misaligned, autofocus is
affected by other objects.
Align the camera so that the autofocus can
focus on the desired image section.