EUCHNER CES-I-AP-C04 Series, Руководство по эксплуатации

Страница: 20 / 36

Operating Instructions
Non-Contact Safety Switch CES-I-AP-.-C04/C14-…
20
(Translation of the original operating instructions) 2115159-13-03/20
12. Technical data
NOTICE
If a data sheet is included with the product, the information on the data sheet applies.
12.1. Technical data for safety switch CES-I-AP-.-C04-…
Parameter Value Unit
min. typ. max.
Housing material PBT plastic
Dimensions 42 x 25 x 18
Weight (device without connecting cable) 0.04 kg
Ambient temperature at U
B
= DC 24 V - 25 - + 65 °C
Storage temperature
- 40 - + 70
Degree of protection IP67
IP69K (only version with flying lead and version with plug connector M8 and mating connector
with the same degree of protection)
Safety class III
Degree of contamination 3
Installation orientation Any
Mounting method Non-flush
Connection - Plug connector M8, 4-pin or
- Connecting cable PUR, 0.25 mm², with plug connector M12, 5-pin, or
- Connecting cable PUR with flying lead, 5 x 0.25 mm²
Operating voltage U
B
(regulated, residual ripple < 5%) 24 ± 15% (PELV) V DC
Current consumption 35 mA
External fuse
(operating voltage)
0.25 - 8 A
Safety outputs FO1A/FO1B Semiconductor outputs, p-switching, short circuit-proof
- Output voltage U(FO1A)/U(FO1B) 1)
HIGH
U(FO1A)
U
B
-1.5 - U
B
V DC
HIGH
U(FO1B)
LOW
U(FO1A)/U(FO1B) 0 1
Switching current per safety output 1 - 150 mA
Utilization category acc. to EN IEC 60947-5-2 DC-13 24 V 150 mA
Caution: Outputs must be protected by a free-wheeling diode in the case of inductive loads.
Off-state current I
r
2) ≤ 0.25 mA
Monitoring output DIA
1)
p-switching, short circuit-proof
- Output voltage 0.8 x U
B
- U
B
V DC
- Max. load - - 50 mA
Rated insulation voltage U
i
- - 300 V
Rated impulse withstand voltage U
imp
- - 1.5 kV
Resilience to vibration Acc. to EN IEC 60947-5-2
Switching frequency - - 1 Hz
Repeat accuracy R
acc. to EN IEC 60947-5-2
≤ 10 %
EMC protection requirements Acc. to EN IEC 60947-5-3
Ready delay - 0.5 - s
Risk time - - 260 ms
Turn-on time - - 300 ms
Discrepancy time - - 10 ms
Test-pulse duration 0.3 3) ms
Test-pulse interval 100 ms
Reliability values acc. to EN ISO 13849-1
Category 4
Performance Level PL e
PFH
D
4.1 x 10
-9
Mission time 20 years
1) Values at a switching current of 50 mA without taking into account the cable length.
2) Maximum current at an output in switched-off state.
3) Applies to a load with C < 30 nF and R < 20 kΩ.