Before adjusting the volume control on any unit
• Make sure all units (including the Listener Unit) are in the correct
position around the neck. The Listener Unit has a microphone to assist
monitoring the Listener’s own voice.
• The listener should be able to hear each talker clearly, as if the talkers
were speaking near the listener’s ear.
• Pressing the button raises or lowers the volume in discrete steps, and
holding the up/down button continuously increases or decreases the
volume.
-The volume control on the Listener Unit adjusts all units
up or down in 6-dB steps.
-The volume control on the Talker Units adjusts individual
units in smaller (3-dB) steps.
CONNECTION/DISCONNECTION BEEPS
The standard Companion Mics system works with one, two or three Talker
Units. If the system is pre-programmed at the factory for three Talker Units
and only one or two are in use, the Listener will hear a short beep.
The Listener hears a beep:
• At connection, if fewer than the programmed number of Talker Units
are connected; and
• When one or more Talker Units disconnect from the system.
TEMPORARY DISCONNECT
Talkers can temporarily disconnect their units by pressing the on/off
button on the Talker Unit until the green light turns off. A beep tone in the
earphone of the Listener Unit announces the disconnect. If a disconnect
occurs accidentally, the light on that Talker Unit will blink to signal the
disconnect.
To reconnect
• Turn on Talker Unit. Green light will blink.
• Turn the Listener Unit off and back on to reconnect all units.
• A solid green light on all units indicates reconnection.
7