5
STARTUP
IMPORTANT: TURN ALL TALKER UNITS ON FIRST
Units can be distributed to the Listener and all Talkers, or the units can
be connected by one user and then handed out to the other users.
Instructions for connection by individual users
Talker Units:
(Identified by a gray label on the back of the unit)
• Turn on—Press and hold the on/off button until green light blinks
(approximately one second). The Listener Unit seeks
all Talker units while the green light is blinking. A
solid green light on all units indicates a connection.
• Put the cord around the neck; the green light faces
out. Adjust the neck cord so the unit rests
comfortably under the chin (see Figure 1).
• Do not adjust the volume control until asked by the
Listener.
Note: If a green light continues to blink on any
unit, the Listener Unit must be turned off and
back on to connect.
Listener Unit:
(Identified by the black label on the back of the unit).
• Turn on Listener Unit after all Talker Units are on.
• Press and hold the on/off button until green light blinks
(approximately one second). The Listener Unit seeks all
Talker units while the green light is blinking. A solid
green light on all units indicates a connection.
• Put the cord around the neck; the green light
faces out. Adjust the neck cord so the unit rests
comfortably under the chin (see Figure 1).
• Plug earphones into the jack on the Listener Unit
(see Figure 2).
• Insert earphones into ear canals (see page 13 for
instructions )
Figure 1
Figure 2