ETS STARPOWER 548, Руководство пользователя

Страница: 29 / 40

24
27330-01A
Care and Maintenance - Lamp and Acrylic Replacement
Removing/Replacing Lamps
After opening (or removing) the acrylic
shields, replace lamps as follows.
Step 1 Grasp a lamp at one end and at
the middle and turn the lamp
one quarter turn. Gently remove
the lamp from its holders.
Step 2 Reinstall the lamp by inserting
the pins located on the ends of
the lamp into the slots on top of
the lamp holders and turn the
lamp a quarter turn. It should
click in place.
Recommended Replacement Lamps
We recommend using the lamps specified
below. Use of uncertified lamps is a viola-
tion of Federal regulations and will void
your warranty. The 100W lamps have an
average life of 800-1000 hours of effective
tanning use. The 160W lamps have an
average life of 600-800 hours. Lamps used
longer than that begin to lose their effec-
tiveness even though they continue to light.
Recommended Replacement Acrylics
Acrylics vary greatly over time in their
ability to effectively transmit UV light.
Acrylics sold by ETS have been life tested
to ensure proper transmission throughout
their useful life.
ONLY THE FOLLOWING LAMPS HAVE BEEN CERTIFIED FOR USE IN THIS EQUIPMENT:
Bench lamps
BRONZING SUN™ PLUS Wolff® Model BSP 71-T12-100WR BI-PIN -or-
SPEED® 225R Wolff® Model SPD71-T12-225R Bi-Pin
Canopy and rear lamp module lamps
Velocity® VS-R™ Wolff® Model VEL71-T12-160W VS-R Bi-Pin -or-
SPEED® 315VS-R Wolff® Model SPD75-T12-315VS-R VS-R Bi-Pin
SolarMax™ IFT facial unit
Heraeus E400 HPT -or- Philips Model HPA 400/30s -or- CosmoTech Model 23045
Shoulder tanner
COSMOLUX® RA plus 15504/40W