2
DO NOT OPERATE IN WET/DAMP CONDITIONS:
If water or other liquid penetrates the
equipment, unplug the power cord and contact the factory for further instructions.
Continuous use in this case may result in electrical shock, fire or permanent damage to the
equipment.
DO NOT OPERATE IN HIGH HUMIDITY:
Operating the equipment in high humidity
conditions will cause deteriation in performance, system failure, or present a shock or fire
hazard. Contact the factory for further instructions.
DO NOT OPERATE IN AREAS WITH HEAVY DUST:
Operating the equipment in high
dust conditions will cause deteriation in performance, system failure, or present a shock or
fire hazard. Contact the factory for further instructions
.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE: Operating the equipment in
the presence of flammable gases or fumes
constitutes a definite safety hazard
. For
equipment designed to operate in such environments the proper safety devices
must be used such as dry air or inert gas purge, intrinsic safe barriers and/or
explosion-proof enclosures.
DONOT USE IN ANY MANNER NOT SPECIFIED OR APPROVED BY THE
MANUFACTURER: Unapproved use may result in damage to the equipment or
present an electrical shock or fire hazard.
MAINTENANCE and SERVICE
CLEANING
:
Keep surfaces clean and free from dust or other contaminants. Such
contaminants can have an adverse affect on system performance or result in
electrical shock or fire. To clean use a damp cloth. Let dry before use.
Do not use
detergent, alcohol or antistatic cleaner as these products may have an adverse affect on
system performance.
SERVICE:
Do not attempt to repair or service the instrument yourself unless instructed by
the factory to do so.
Opening or removing the covers may expose you to high
voltages, charged capacitors, electric shock and other hazards. If service or repair
is required, contact the factory.
