Images are for illustrative purposes.
We reserve the right to make changes.
13
®
RDM-31-0222
NORD
canopy
|
OZ 3.0 Installation Guide
Finally, if it is desired to connect the system to the local area network, connect the LAN cable to the Control
Panel by unplugging the existing short LAN jumper cable inside and connect your LAN cable straight to the
port on the board as seen below.
LAN cable must be connected to a network switch or to the closest LAN socket.
Reassemble the housing in reverse order, with the smaller LED display above the larger one. Ensure the text
on the plexiglass is oriented correctly and fasten the housing with the two fixing screws on the sides.
Please note! After powerup, starting up the Control Panel takes approximately 40 seconds. The
system operating interface is unavailable until this boot process has completed.